(1) Vendor needs to provide dust collection system to the government authority located in Mississippi
- Requirements description covers an electrically powered dust collection system of sufficient capacity to support a 5-axis router system, defined herein, dedicated to machining operations for carbon fiber-reinforced plastic composite and similar materials.
- Explosion protection, meeting current industry regulations, shall be an element of the system design, along with replaceable filtration elements configured for optimum containment of carbon fiber residue.
- Replacement access of the filers shall be from the clean air side of the unit.
- Filtration levels shall be sufficient under the projected dust particle environment from machining of carbon fiber, vinyl-ester, epoxy or plastic media tooling board to allow for an option of recirculation to the HVAC controlled environment of the facility shop vs. to the exterior in consideration of shop environmental control efficiency.
- Filters shall be of an antistatic format.
- Clean air emissions value to be: < 0.5 mg/m3.
- Targeted operational life of the filter set under rated conditions to be up to 20,000 hours.
↧