– Vendor needs to provide security camera system to the government authority located in Starkville, MS. • Contractor shall provide and install adjustable cameras, control equipment, central recording system, connections, cabling, software, and all other required hardware for a complete Security Camera System to provide acceptable coverage for areas noted on the attached site maps.• Provide appropriate indoor or outdoor UV resistant connection to all cameras and fixed equipment. Fiber preferred where applicable.• Proper grounding and surge protection shall be provided and installed with all Security Camera equipment including control and recording equipment.• All equipment shall be mounted according to mfg. recommendations. All interior equipment shall be rack mounted or mounted into a cabinet, appropriately sized for the equipment provided. All interior equipment and cabling shall be neat and unobtrusive.• All cabling, wiring, connectors, connection points, etc., shall be sealed to prevent moisture or corrosion issues.• All cabling, wiring, connectors, connection points, etc., shall be neat, orderly, and labeled as necessary for troubleshooting purposes.• All cabling, wiring, connectors, connection points, etc., shall have proper strain relief.• Ethernet and any excessive length cabling runs shall be provided by low–loss cabling and potentially include amplifiers to prevent any degradation of signal loss.• Any wall penetration shall be neat, as compact as possible, and sealed properly. Entry boots shall be provided where necessary.• Contractor shall finalize details with the utility company for use of any existing utility poles.• If additional mounting poles are required; the contractor shall identify locations, furnish necessary materials, and install. Cost of additional power poles or utility poles shall be included in the proposal price.• Contractor is responsible for thorough site review and educated recommendations on all equipment locations.
↧